<?xml version="1.0" encoding="UTF-8"?><metadata>
<idinfo>
<citation>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>20090720</pubdate>
<title>DIGITAL FLOOD INSURANCE RATE MAP DATABASE, SUMMIT COUNTY, USA</title>
<geoform>FEMA-DFIRM-Final</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<onlink>http://www.fema.gov/msc</onlink>
<lworkcit>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>Unknown</pubdate>
<title>FEMA CASE 06-05-B051S</title>
</citeinfo>
</lworkcit>
</citeinfo>
</citation>
<descript>
<abstract>The Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk information and supporting data used to develop the risk data. The primary risk classifications used are the 1-percent-annual-chance flood event, the 0.2-percent-annual- chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA).</abstract>
</descript>
</idinfo>
<dataqual>
<attracc>
<attraccr>The DFIRM Database consists of community based vector files and associated attributes produced in conjunction with the hard copy FEMA FIRM. The published effective FIRM and DFIRM maps are issued as the official designation of the SFHAs. As such they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Attribute accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system.</attraccr>
</attracc>
<lineage/>
</dataqual>
<spref>
<horizsys>
<planar>
<planci>
<plance>coordinate pair</plance>
<coordrep>
<absres>0.000001</absres>
<ordres>0.000001</ordres>
</coordrep>
<plandu>survey feet</plandu>
</planci>
</planar>
<geodetic>
<horizdn>North American Datum of 1983</horizdn>
<ellips>Geodetic Reference System 80</ellips>
<semiaxis>6378137.000000</semiaxis>
<denflat>298.257222</denflat>
</geodetic>
</horizsys>
<vertdef>
<altsys>
<altdatum>North American Vertical Datum of 1988</altdatum>
<altres>0.01</altres>
<altunits>feet</altunits>
<altenc>Attribute values</altenc>
</altsys>
</vertdef>
</spref>
<eainfo>
<detailed Name="Floodplain_2009">
<enttyp>
<enttypl>S_Base_Index</enttypl>
<enttypd>Location and attributes for a tiling index for raster data used for the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">2494</enttypc>
</enttyp>
<attr>
<attrlabl Sync="TRUE">OBJECTID</attrlabl>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">FLD_AR_ID</attrlabl>
<attalias Sync="TRUE">FLD_AR_ID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">11</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">FLD_ZONE</attrlabl>
<attalias Sync="TRUE">FLD_ZONE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">55</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">FLOODWAY</attrlabl>
<attalias Sync="TRUE">FLOODWAY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">30</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SFHA_TF</attrlabl>
<attalias Sync="TRUE">SFHA_TF</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">1</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">STATIC_BFE</attrlabl>
<attalias Sync="TRUE">STATIC_BFE</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">13</atprecis>
<attscale Sync="TRUE">2</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">V_DATUM</attrlabl>
<attalias Sync="TRUE">V_DATUM</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">6</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">DEPTH</attrlabl>
<attalias Sync="TRUE">DEPTH</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">13</atprecis>
<attscale Sync="TRUE">2</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">LEN_UNIT</attrlabl>
<attalias Sync="TRUE">LEN_UNIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">VELOCITY</attrlabl>
<attalias Sync="TRUE">VELOCITY</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">13</atprecis>
<attscale Sync="TRUE">2</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">VEL_UNIT</attrlabl>
<attalias Sync="TRUE">VEL_UNIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">AR_REVERT</attrlabl>
<attalias Sync="TRUE">AR_REVERT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">6</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">BFE_REVERT</attrlabl>
<attalias Sync="TRUE">BFE_REVERT</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">13</atprecis>
<attscale Sync="TRUE">2</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">DEP_REVERT</attrlabl>
<attalias Sync="TRUE">DEP_REVERT</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">13</atprecis>
<attscale Sync="TRUE">2</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SOURCE_CIT</attrlabl>
<attalias Sync="TRUE">SOURCE_CIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">11</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE.STArea()</attrlabl>
<attalias Sync="TRUE">SHAPE.STArea()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">SHAPE.STLength()</attrlabl>
<attalias Sync="TRUE">SHAPE.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
<detailed>
<enttyp>
<enttypl>S_BFE</enttypl>
<enttypd>Location and attributes for base flood elevations lines shown on DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_FIRM_Pan</enttypl>
<enttypd>Location and attributes for DFIRM hardcopy map panels</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Fld_Haz_Ar</enttypl>
<enttypd>Location and attributes flood insurance risk zones on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Fld_Haz_Ln</enttypl>
<enttypd>Location and attributes for boundaries of flood insurance risk zones on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Gen_Struct</enttypl>
<enttypd>Location and attributes for flood control structures shown on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Label_Ld</enttypl>
<enttypd>Location and attributes for leader lines on transportation and hydrography labels shown on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Label_Pt</enttypl>
<enttypd>Location and attributes for transportation and hydrography labels shown on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Perm_Bmk</enttypl>
<enttypd>Location and attributes for bench marks on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_PLSS_Ar</enttypl>
<enttypd>Location and attributes of sections, townships and ranges on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_PLSS_Ln</enttypl>
<enttypd>Location and attributes section lines, township lines and range lines on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Pol_Ar</enttypl>
<enttypd>Location and attributes for political jurisdictions shown on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Pol_Ln</enttypl>
<enttypd>Location and attributes for political boundaries shown on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Quad_Index</enttypl>
<enttypd>Location and attributes for USGS quadrangle maps covering the DFIRM area.</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Trnsport_Ln</enttypl>
<enttypd>Location and attributes for roads, railroads and other transportation features shown on the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_Wtr_Ln</enttypl>
<enttypd>Location and attributes for hydrography features shown on DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<detailed>
<enttyp>
<enttypl>S_XS</enttypl>
<enttypd>Location and attributes for cross-section lines in the area covered by the DFIRM</enttypd>
<enttypds>FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)</enttypds>
</enttyp>
</detailed>
<overview>
<eaover>The DFIRM Database is made up of several data themes containing both spatial and attribute information. These data together represent the current flood risk for the subject area as identified by FEMA. The attribute tables include SFHA locations, flood zone designations, BFEs, political entities, cross-section locations, FIRM panel information, and other data related to the NFIP.</eaover>
<eadetcit>Appendix L of FEMA Guidelines and Specifications for FEMA Flood Hazard Mapping Partners contains a detailed description of each attribute code and a reference to other relevant information.</eadetcit>
<eadetcit>The following tables are included in this data set: Study_Info L_Stn_Start L_Pol_FHBM L_mt1_LOMC L_Comm_Info S_Base_Index S_BFE S_FIRM_Pan S_Fld_Haz_Ar S_Fld_Haz_Ln S_Gen_Struct S_Perm_Bmk S_PLSS_Ln S_PLSS_Ar S_Pol_Ar S_Pol_Ln S_Quad_Index S_Wtr_Ln S_XS S_Trnsport_Ln</eadetcit>
</overview>
</eainfo>
<distinfo>
<distrib>
<cntinfo>
<cntorgp>
<cntorg>FEMA, Map Service Center</cntorg>
</cntorgp>
<cntaddr>
<addrtype>mailing</addrtype>
<address>P.O. Box 1038</address>
<city>Jessup</city>
<state>Maryland</state>
<postal>20794-1038</postal>
<country>USA</country>
</cntaddr>
<cntvoice>1-800-358-9616</cntvoice>
<cntemail>http://www.fema.gov/msc</cntemail>
<cntinst>Data requests must include the full name of the community or county and the FIRM panel number(s) or the 7.5- minute series quadrangle sheet area(s) covered by the request.</cntinst>
</cntinfo>
</distrib>
<distliab>No warranty expressed or implied is made by FEMA regarding the utility of the data on any other system nor shall the act of distribution constitute any such warranty. FEMA will warrant the delivery of this product in a computer-readable format, and will offer appropriate adjustment of credit when the product is determined unreadable by correctly adjusted computer input peripherals, or when the physical medium is delivered in damaged condition. Requests for adjustment of credit must be made within 90 days from the date of this shipment from the ordering site.</distliab>
<stdorder>
<digform>
<digtinfo>
<formname>ARCE</formname>
</digtinfo>
<digtopt>
<onlinopt>
<computer>
<networka>
<networkr>http://www.fema.gov/msc</networkr>
</networka>
</computer>
</onlinopt>
</digtopt>
</digform>
<digform>
<digtinfo>
<formname>ARCE</formname>
</digtinfo>
<digtopt>
<offoptn>
<offmedia>CD-ROM</offmedia>
<recfmt>ISO 9660</recfmt>
</offoptn>
</digtopt>
</digform>
<fees>Contact Distributor</fees>
</stdorder>
</distinfo>
<metainfo>
<metd>20070820</metd>
<metc>
<cntinfo>
<cntperp>
<cntper>FREE TEXT</cntper>
<cntorg>Federal Emergency Management Agency</cntorg>
</cntperp>
<cntpos>FREE TEXT</cntpos>
<cntaddr>
<addrtype>mailing</addrtype>
<address>500 C Street, S.W.</address>
<city>Washington</city>
<state>District of Columbia</state>
<postal>20472</postal>
<country>USA</country>
</cntaddr>
<cntvoice>1-800-358-9616</cntvoice>
<cntemail>http://www.fema.gov/msc</cntemail>
</cntinfo>
</metc>
<metstdn>FGDC Content Standards for Digital Geospatial Metadata</metstdn>
<metstdv>FGDC-STD-001-1998</metstdv>
<metextns>
<onlink>http://hazards.fema.gov</onlink>
<onlink>http://www.epsg.org</onlink>
<metprof>FEMA NFIP Metadata Content and Format Standard</metprof>
</metextns>
</metainfo>
In addition to the preceding, required text, the Abstract should also describe the projection and coordinate system as well as a general statement about horizontal accuracy.
<timeperd>
<timeinfo>
<sngdate>
<caldate>20070823</caldate>
</sngdate>
</timeinfo>
<current>FIRM and FIS Effective Date</current>
</timeperd>
<status>
<progress>Complete</progress>
<update>Unknown</update>
</status>
<spdom>
<bounding>
<westbc>-160.37500</westbc>
<eastbc>-80.500000</eastbc>
<northbc>49.499999</northbc>
<southbc>18.874999</southbc>
</bounding>
</spdom>
<keywords>
<theme>
<themekt>ISO 19115 Topic Category</themekt>
<themekey>hydrology</themekey>
<themekey>environment</themekey>
<themekey>inlandWaters</themekey>
<themekey>structure</themekey>
<themekey>transportation</themekey>
<themekey>elevation</themekey>
</theme>
<theme>
<themekt>FEMA NFIP Topic Category</themekt>
<themekey>DFIRM</themekey>
<themekey>FIRM</themekey>
<themekey>FEMA Flood Hazard Zone</themekey>
<themekey>DFIRM Database</themekey>
<themekey>Special Flood Hazard Area</themekey>
<themekey>Digital Flood Insurance Rate Map</themekey>
<themekey>CBRS</themekey>
<themekey>Coastal Barrier Resources System</themekey>
<themekey>Riverine Flooding</themekey>
<themekey>Coastal Flooding</themekey>
<themekey>NFIP</themekey>
<themekey>Base Flood Elevation</themekey>
<themekey>SFHA</themekey>
<themekey>Flood Insurance Rate Map</themekey>
<themekey>Floodway</themekey>
</theme>
<place>
<placekt>None</placekt>
<placekey>REGION 05</placekey>
<placekey>STATE OH</placekey>
<placekey>COUNTY SUMMIT</placekey>
<placekey>COUNTY-FIPS 153</placekey>
<placekey>COMMUNITY SUMMIT COUNTY ALL JURISDICTIONS</placekey>
<placekey>FEMA-CID 39153C</placekey>
</place>
</keywords>
<accconst>None</accconst>
<useconst>The hardcopy FIRM and DFIRM and the accompanying FISs are the official designation of SFHAs and Base Flood Elevations (BFEs) for the NFIP. For the purposes of the NFIP, changes to the flood risk information published by FEMA may only be performed by FEMA and through the mechanisms established in the NFIP regulations (44 CFR Parts 59-78). These digital data are produced in conjunction with the hardcopy FIRMs and generally match the hardcopy map exactly. However the hardcopy flood maps and flood profiles are the authoritative documents for the NFIP. Acknowledgement of FEMA would be appreciated in products derived from these data.</useconst>
<ptcontac>
<cntinfo>
<cntorgp>
<cntorg>Federal Emergency Management Agency</cntorg>
</cntorgp>
<cntaddr>
<addrtype>mailing</addrtype>
<address>500 C Street, S.W.</address>
<city>Washington</city>
<state>District of Columbia</state>
<postal>20472</postal>
<country>USA</country>
</cntaddr>
<cntvoice>1-800-358-9616</cntvoice>
<cntemail>http://www.fema.gov/msc</cntemail>
</cntinfo>
</ptcontac>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>20051101</pubdate>
<title>Flood Insurance Rate Map, Summit County, USA.</title>
<geoform>map</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<onlink>http://www.fema.gov/msc</onlink>
</citeinfo>
</crossref>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>20051101</pubdate>
<title>Flood Insurance Study, Summit County, USA.</title>
<geoform>document</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<onlink>http://www.fema.gov/msc</onlink>
</citeinfo>
</crossref>
<crossref>
<citeinfo>
<origin>Federal Emergency Management Agency</origin>
<pubdate>20051101</pubdate>
<title>Raster FIRM, Summit County, USA.</title>
<geoform>raster digital data</geoform>
<pubinfo>
<pubplace>Washington, DC</pubplace>
<publish>Federal Emergency Management Agency</publish>
</pubinfo>
<onlink>http://www.fema.gov/msc</onlink>
</citeinfo>
</crossref>
Independent quality control testing of FEMA's DFIRM database was also performed.
To obtain more detailed information in areas where Base Flood Elevations (BFEs) and/or floodways have been determined, users are encouraged to consult the Flood Profiles and Floodway Data and/or Summary of Stillwater Elevations tables contained within the FIS report that accompanies this DFIRM database. Users should be aware that BFEs shown in the S_BFE table represent rounded whole-foot elevations. These BFEs are intended for flood insurance rating purposes only and should not be used as the sole source of flood elevation information. Accordingly, flood elevation data presented in the FIS report must be used in conjunction with the FIRM for purposes of construction and/or floodplain management. The 1-percent-annual-chance water-surface elevations shown in the S_XS table match the regulatory elevations shown in the FIS report.
<Esri>
<CreaDate>20220314</CreaDate>
<CreaTime>15024900</CreaTime>
<SyncOnce>FALSE</SyncOnce>
<ModDate>20141204</ModDate>
<ModTime>11452800</ModTime>
<ArcGISFormat>1.0</ArcGISFormat>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">Floodplain_2009</itemName>
<imsContentType Sync="TRUE">002</imsContentType>
<nativeExtBox>
<westBL Sync="TRUE">2192433.484985</westBL>
<eastBL Sync="TRUE">2278169.679058</eastBL>
<southBL Sync="TRUE">453541.645030</southBL>
<northBL Sync="TRUE">615019.846675</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Foot_US (0.304801)</csUnits>
<projcsn Sync="TRUE">NAD_1983_StatePlane_Ohio_North_FIPS_3401_Feet</projcsn>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.1'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_StatePlane_Ohio_North_FIPS_3401_Feet&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Lambert_Conformal_Conic&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,1968500.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-82.5],PARAMETER[&amp;quot;Standard_Parallel_1&amp;quot;,40.43333333333333],PARAMETER[&amp;quot;Standard_Parallel_2&amp;quot;,41.7],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,39.66666666666666],UNIT[&amp;quot;Foot_US&amp;quot;,0.3048006096012192],AUTHORITY[&amp;quot;EPSG&amp;quot;,3734]]&lt;/WKT&gt;&lt;XOrigin&gt;-118963899.99998273&lt;/XOrigin&gt;&lt;YOrigin&gt;-96373799.999926224&lt;/YOrigin&gt;&lt;XYScale&gt;50662.504242896808&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;0.00015790770945006431&lt;/XYTolerance&gt;&lt;ZTolerance&gt;2&lt;/ZTolerance&gt;&lt;MTolerance&gt;2&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;102722&lt;/WKID&gt;&lt;LatestWKID&gt;3734&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
</coordRef>
</DataProperties>
<SyncDate>20141204</SyncDate>
<SyncTime>11452800</SyncTime>
</Esri>
<dataIdInfo>
<envirDesc Sync="FALSE">Esri ArcGIS 10.2.2.3552</envirDesc>
<dataLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<idCitation>
<resTitle Sync="FALSE">Floodplain_2009</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-81.689804</westBL>
<eastBL Sync="TRUE">-81.372083</eastBL>
<northBL Sync="TRUE">41.351894</northBL>
<southBL Sync="TRUE">40.906097</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
</dataIdInfo>
<mdLang>
<languageCode Sync="TRUE" value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<distInfo>
<distFormat>
<formatName Sync="FALSE">Feature Class</formatName>
</distFormat>
</distInfo>
<mdHrLv>
<ScopeCd Sync="TRUE" value="005"/>
</mdHrLv>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="3734"/>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">8.2.6</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="Floodplain_2009">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">2494</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<spdoinfo>
<ptvctinf>
<esriterm Name="Floodplain_2009">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">2494</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<mdDateSt Sync="TRUE">20141204</mdDateSt>
</metadata>
