20220314
15121900
FALSE
002
SummitLakesandPonds
1325097.550000
2558274.311299
136582.820704
1463434.408579
1
175.184
Projected
GCS_North_American_1927
Linear Unit: Foot_US (0.304801)
NAD_1927_StatePlane_Ohio_South_FIPS_3402
<ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/10.1'><WKT>PROJCS["NAD_1927_StatePlane_Ohio_South_FIPS_3402",GEOGCS["GCS_North_American_1927",DATUM["D_North_American_1927",SPHEROID["Clarke_1866",6378206.4,294.9786982]],PRIMEM["Greenwich",0.0],UNIT["Degree",0.0174532925199433]],PROJECTION["Lambert_Conformal_Conic"],PARAMETER["False_Easting",2000000.0],PARAMETER["False_Northing",0.0],PARAMETER["Central_Meridian",-82.5],PARAMETER["Standard_Parallel_1",38.73333333333333],PARAMETER["Standard_Parallel_2",40.03333333333333],PARAMETER["Latitude_Of_Origin",38.0],UNIT["Foot_US",0.3048006096012192],AUTHORITY["EPSG",32023]]</WKT><XOrigin>-119633400</XOrigin><YOrigin>-95606300</YOrigin><XYScale>3048.0060960121918</XYScale><ZOrigin>0</ZOrigin><ZScale>1</ZScale><MOrigin>0</MOrigin><MScale>1</MScale><XYTolerance>0.0032808333333333331</XYTolerance><ZTolerance>0.001</ZTolerance><MTolerance>0.001</MTolerance><HighPrecision>true</HighPrecision><WKID>32023</WKID><LatestWKID>32023</LatestWKID></ProjectedCoordinateSystem>
50000
5000
20170105
11054500
20170105
11054500
FGDC CSDGM Metadata
1.0
Terry L. Wells
Ohio Department of Natural Resources
614-265-6777
Not Available
Not Available
OH
Not Available
US
terry.wells@dnr.state.oh.us
20170105
ArcGIS Metadata
1.0
David Crecelius
Ohio Department of Natural Resources-Office of Information Technology
GIMS Coordinator
614-265-6776
Office of Information Technology
1894 Fountain Square Court
Columbus
OH
43224-1360
US
dave.crecelius@dnr.state.oh.us
No fees for downloading, CDs may be purchased
Call, write or fax contact person for instructions
ARCE
unknown
208
http://apps.ohiodnr.gov/geodata/statewide/oh_hydro.exe
http://apps.ohiodnr.gov/geodata/statewide/oh_hydro.exe
175.184
Feature Class
SummitLakesandPonds
2004-04-25
Mark R. Anstaett
Ohio Department of Natural Resources, Division of Real Estate & Land Management
Columbus, OH
GIS Coverage - Digital
This is a statewide digital version of the Hydrography layer of the published USGS 1:24OOO-scale topographic map series. It was created from DLG files of each scanned 7.5-minute quad map, using custom ARC/INFO software routines which did the following steps: convert from DLG format to coverage format project from UTM to StatePlane map projection rubbersheet map sheet corners to exact computed quad-corner coordinates run semi-automated Edgematching procedure which joins hydrography lines along the quad edges, using distance-offset (maximum of 100 feet) and attribute-match criteria to determine which lines to join. merge the individual quad coverages and dissolve the quad-edge lines Processing was done using Double Precision coordinates and math, with processing tolerance (Fuzzy) of 1 foot. In the Database/Dataset Section the items CMAJOR and CMINOR represent coded pairs and are documented together. Up to five pairs in the pat and four pairs in the aat may be present. These will be appear in the tables as CMAJOR1 CMINOR1 CMAJOR2 CMINOR2, etc. The layer has been provided in both shapefile and coverage format. In the case of the shape file separate shapefiles are provided for point, line, and polygon data. In the coverage format the line and polygon data is combined in one coverage. The shapefiles will be the choice of most users due to speed of drawing issues. Those users desiring to manipulate the original data may want to use the coverage format. All shapefiles have been combined for simplicities sake into one self extracting zip file which expands to about 500 megabytes. However, the value listed in the file size parameter of the metadata represents only the size of the particular shapefile being documented. Also it should be noted that the coverages contain redefined items which of necessity had to be split into separate items in the shapefiles or omitted because this option isn't available in shapefiles. This layer documentation is for the shapefile which includes polygon features.
This coverage was created as part of an effort to update and augment the ease of use of the United States Geological Survey (USGS) Digital Line Graph - Hydrography Layer. It will be used as one input in the general updating of this information by the USGS.
Raymond M. Lohrer
Real Estate & Land Management
GIS Specialist
614 265-1044
267-2981
2045 Morse Rd, Bldg E-2
Columbus
OH
43229
US
Mike.Lohrer@dnr.state.oh.us
USA
Ohio
Hydrologic
inlandWaters
Hydrologic
USA
Ohio
inlandWaters
The Ohio Department of Natural Resources (DNR) provides this geographic data 'as is.' DNR makes no guarantee or warranty concerning the accuracy of information contained in the geographic data. DNR further makes no warranties, either expressed or implied, as to the condition of the product, or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user. Although these data have been processed successfully on computers of DNR, no warranty, expressed or implied, is made by DNR regarding the use of these data on any other system, nor does the fact of distribution constitute or imply any such warranty. In no event shall the DNR have any liability whatsoever for payment of any consequential, incidental, indirect, special, or tort damages of any kind, including, but not limited to, any loss of profits arising out of use of or reliance on the geographic data.
DNR further makes no warranties, either expressed or implied, as to the condition of the product, or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user.
20040425
2004-04-25
-84.821
-80.501
38.4
41.98
Version 6.2 (Build 9200) ; Esri ArcGIS 10.2.2.3552
1
-84.980371
-80.448092
42.016521
38.350852
Last metadata review date: 20140827
DNR further makes no warranties, either expressed or implied, as to the condition of the product, or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user.
Topology for this data set was built using the Arc/Info CLEAN and BUILD commands.
Data set is complete for the area of coverage.
Horizontal positional accuracy is based upon the use of USGS source quadrangles that are compiled to meet National Map Accuracy Standards (NMAS). NMAS horizontal accuracy requires that at least 90 percent of points tested are within 0.02 inch of the true position. The digital data are estimated to contain a horizontal positional error of less than or equal to 0.003 inch standard error in the two component directions relative to the source graphic.
Horizontal positional accuracy is based upon the use of USGS source quadrangles that are compiled to meet National Map Accuracy Standards (NMAS). NMAS horizontal accuracy requires that at least 90 percent of points tested are within 0.02 inch of the true position. The digital data are estimated to contain a horizontal positional error of less than or equal to 0.003 inch standard error in the two component directions relative to the source graphic.
12.19
This is a statewide digital version of the Hydrography layer of the published USGS 1:24OOO-scale topographic map series. It was created from DLG files of each scanned 7.5-minute quad map, using custom ARC/INFO software routines which did the following steps: convert from DLG format to coverage format project from UTM to StatePlane map projection rubbersheet map sheet corners to exact computed quad-corner coordinates run semi-automated Edgematching procedure which joins hydrography lines along the quad edges, using distance-offset (maximum of 100 feet) and attribute-match criteria to determine which lines to join. merge the individual quad coverages and dissolve the quad-edge lines Processing was done using Double Precision coordinates and math, with processing tolerance (Fuzzy) of 1 foot. In the Database/Dataset Section the items CMAJOR and CMINOR represent coded pairs and are documented together. Up to five pairs in the pat and four pairs in the aat may be present. These will be appear in the tables as CMAJOR1 CMINOR1 CMAJOR2 CMINOR2, etc. The layer has been provided in both shapefile and coverage format. In the case of the shape file separate shapefiles are provided for point, line, and polygon data. In the coverage format the line and polygon data is combined in one coverage. The shapefiles will be the choice of most users due to speed of drawing issues. Those users desiring to manipulate the original data may want to use the coverage format. All shapefiles have been combined for simplicities sake into one self extracting zip file which expands to about 500 megabytes. However, the value listed in the file size parameter of the metadata represents only the size of the particular shapefile being documented. Also it should be noted that the coverages contain redefined items which of necessity had to be split into separate items in the shapefiles or omitted because this option isn't available in shapefiles. This layer documentation is for the shapefile which includes polygon features.
2004-04-25
Digital Line Graph Data from USGS Quadrangle Maps compiled in the GISOM Project
24000
Digital Line Graph Data from USGS Quadrangle Maps compiled in the GISOM Project
None
1999-04-30
Digital Line Graph Data from USGS Quadrangle Maps compiled in the GISOM Project
19990430
1999-04-30
dataset
EPSG
8.2.6
0
Simple
FALSE
0
TRUE
FALSE
SummitLakesandPonds
Feature Class
0
OBJECTID
OBJECTID
OID
4
10
0
Internal feature number.
Esri
Sequential unique whole numbers that are automatically generated.
Lake_or_Pond_Name
Lake_or_Pond_Name
String
50
0
0
LakePondArea
LakePondArea
Double
8
38
8
LakePondPerimeter
LakePondPerimeter
Double
8
38
8
Shape
Shape
Geometry
4
0
0
Feature geometry.
ESRI
Coordinates defining the features.
Shape.STArea()
Shape.STArea()
Double
0
0
0
Shape.STLength()
Shape.STLength()
Double
0
0
0